|
Issue:
How do I locate blocked traffic within the Shield Firewall 5.0?
Solution:
It appears you are experiencing issues locating the blocked traffic within the Shield Firewall 5.0. Please see the following instructions to address your issue.
Firstly, make sure your Blocked Traffic is being logged:- Go to your Network Monitor Tab and edit the Block All IP rule (normally on the bottom)
- Make sure the check mark is checked by the Action dropdown.
Secondly, to review traffic blocked by this rule, switch to the Activity Tab and select the Logs.
| Published: |
1/10/2008 8:50:32 AM |
Last Modified: |
1/10/2008 10:40:59 AM |
|